Forums > Kitesurfing General

Building a Super Size Stunt Kite

Reply
Created by MagicRide > 9 months ago, 23 Nov 2020
MagicRide
688 posts
23 Nov 2020 7:52AM
Thumbs Up

Hi guys,

I'm building a stunt kite with a 7 foot wing span out of an x-ply windsurfing sail I don't use anymore, and will pull out the battens, sand them for desired diameter for the kite spars. I don't have a sewing machine, so I will adhere the edges together with glue or contact cement. Question is, what is the best choice to use for the strongest bond to x-ply?

Thanks!

Sandfoot
VIC, 566 posts
24 Nov 2020 6:16PM
Thumbs Up

Have to be epoxy - two part- you can get at Bunnings, do a small test first

Gateman
QLD, 409 posts
24 Nov 2020 9:01PM
Thumbs Up

Select to expand quote
MagicRide said..
Hi guys,

I'm building a stunt kite with a 7 foot wing span out of an x-ply windsurfing sail I don't use anymore, and will pull out the battens, sand them for desired diameter for the kite spars. I don't have a sewing machine, so I will adhere the edges together with glue or contact cement. Question is, what is the best choice to use for the strongest bond to x-ply?

Thanks!


Sorry can't help much but have seriously been thinking about one of those old school "Singer" sewing machines for doing this type of work as well as some other home canvas projects.

MagicRide
688 posts
25 Nov 2020 4:55AM
Thumbs Up

I'm thinking now about using gorilla tape. That stuff is pretty sticky.

So I weighed the kite spars needed and that comes too 1.4 pounds. I think I can build this kite under 5 pounds. With a 7 foot wing span and 2.5 feet tall, do you think I've got enough surface area for it to fly? I'm thinking med- high winds for this kite.

djdojo
VIC, 1607 posts
25 Nov 2020 10:06AM
Thumbs Up

Way too heavy. My 2.2m Cloud weighs about 2 pounds for similar dimensions. X-ply windsurf sail material is overkill for any possible strength requirements of a kite, and that weight will kill any possibility of performance.

MagicRide
688 posts
25 Nov 2020 1:47PM
Thumbs Up

Select to expand quote
djdojo said..
Way too heavy. My 2.2m Cloud weighs about 2 pounds for similar dimensions. X-ply windsurf sail material is overkill for any possible strength requirements of a kite, and that weight will kill any possibility of performance.


Yes! You're so spot on right! Just had a long conversation with a kite designer and builder. He said the same thing. Now if the spars were hallow, I could get the weight down. I've seen several x-ply stunt kites on the web, but they're probably using hallow spars.












Sandfoot
VIC, 566 posts
25 Nov 2020 7:49PM
Thumbs Up

Just wait for more wind or jump of a higher cliff or something- don't listen to the doubters. You can fly if you think you can fly

MagicRide
688 posts
26 Nov 2020 1:50AM
Thumbs Up

Select to expand quote
Sandfoot said..
Just wait for more wind or jump of a higher cliff or something- don't listen to the doubters. You can fly if you think you can fly


I like your optimism!

NorthernKitesAUS
QLD, 1061 posts
26 Nov 2020 11:58AM
Thumbs Up

Select to expand quote
MagicRide said..
Hi guys,

I'm building a stunt kite with a 7 foot wing span out of an x-ply windsurfing sail I don't use anymore, and will pull out the battens, sand them for desired diameter for the kite spars. I don't have a sewing machine, so I will adhere the edges together with glue or contact cement. Question is, what is the best choice to use for the strongest bond to x-ply?

Thanks!


Is the Birdman Rally back on?



Subscribe
Reply

Forums > Kitesurfing General


"Building a Super Size Stunt Kite" started by MagicRide