Any tips on changing the outside leader lines on a 2017ish Cab bar? The area on the bottom of the bar where one would normally access the leaders is sealed-over with EVA foam. I realize if I just start cutting I'll figure it out but trying to do it as neatly as possible.
Thank you in advance.
If I' recall there are little plugs at the bottom of each end which can be taken out and you can somehow access the leader lines through the holes, you may need some very fine but strong pliers to get hold of them
Don't cut up the eva foam you'll wreck it forever, you might do a little less damage by going through the holes.