Forums > Kitesurfing Gear Reviews

Fin size shinn monk??

Reply
Created by johnojjohnso > 9 months ago, 25 Jan 2018
johnojjohnso
NSW, 44 posts
25 Jan 2018 9:43AM
Thumbs Up

Hi
Has any one messed around with different fin sizes on a shinn monk?
I have recently bought a 2017 135cm
Monk and the fins are huge I'm just wondering if they have put such big fins on for a reason or if it's worth trying smaller. If any one had tried it would be good to know what you think and what sizes you have tried before spending on a new set.
Don't get me wrong I'm happy with the board as is but would be interested to hear your opinions.

Thanks

Wonderfulx
QLD, 38 posts
25 Jan 2018 6:41PM
Thumbs Up

Mate, I just went through some warranty issues with a shinn ronson and complained about the length. I assume they are the same "bite" fins. Mark shinn said it was a preference thing. For me they caught constantly in the shallow water and made me crash often.

They are quite soft and I ended up cracking the side of 2. Replacements were sent but I took a second hand set of harder fins from the shop instead.

SonnyRider
92 posts
25 Jan 2018 6:40PM
Thumbs Up

The smaller 43mm fins will make the board a little more skatey, easier to swap over to toeside and you will lose a little bit of upwindability compared to the bigger fins.

I used to like the bigger fins, but found the smaller fins better for nearly all conditions, you just learn to adapt for the smaller fins.

Currently my Bronq runs bigger fins on heal side(53mm) and smaller(43mm) fins on the toe side, helps with toe side changes and general slashing around.

Wonderfulx.
If you're constantly catching the bigger fins in the shallows, then you need to get out a little deeper or swap down to the smaller fins. You're blaming the fins for you wanting to kite in watery sand, makes no sense.

cauncy
WA, 8407 posts
25 Jan 2018 6:45PM
Thumbs Up

Select to expand quote
Wonderfulx said..
Mate, I just went through some warranty issues with a shinn ronson and complained about the length. I assume they are the same "bite" fins. Mark shinn said it was a preference thing. For me they caught constantly in the shallow water and made me crash often.

They are quite soft and I ended up cracking the side of 2. Replacements were sent but I took a second hand set of harder fins from the shop instead.



I constantly ride in the shallows, keeping a backfoot pressure nose up stops you from stacking, I vertically catch a fin on every carve







You need to adjust your riding to location, personally I wouldn't bother as the boards offer insane grip if your aggressive, especially in rolling swell

Kraut
WA, 542 posts
26 Jan 2018 10:25AM
Thumbs Up

Just get some 30 or even 20mm fins from e.g. Cabrinha and you can ride in the shallows and up the beach. I am doing this with my Ronson. Or even ride it finless, but this will make the pop harder.

Mark Shinn explained in another thread that he uses fins which will be good for the majority of riders, and the marjority is usually rookies or less advanced riders. The others will be able to play around with smaller fins if they like. Costs us more $, but I understand it.

johnojjohnso
NSW, 44 posts
27 Jan 2018 1:24PM
Thumbs Up

Just stuck a set of North 50mm fins on that I had laying around there only 3mm different in hight but when I put them next to the shinns there's a big difference in surface area. Not had a chance to try them out yet but it will be interesting to see how much difference it makes.
Really can't understand why a set of fins costs so much it can't cost more than a couple of $ to make a set




johnojjohnso
NSW, 44 posts
31 Jan 2018 2:06PM
Thumbs Up

I have had a couple of sessions with the smaller fins and there a winner for me. Still has plenty of grip but just a bit more fun to ride you can really use the rail hard to get grip with this board but with the smaller fins when you flatten the board out it becomes nice and lose

daggy
WA, 527 posts
27 Mar 2018 9:18PM
Thumbs Up

Agreed. Those BITE fins are too big
I had an older Shinn Dundee that had smaller red 43mm (? )fins , so I've put these on my new Monk and it's way more fun to fling around. I found the big Bite fins made it track too straight and it was threatening to hurt my knees whilst doing quick little switches.
I actually kept one big fin on my back heel side, which I call my 'boosting fin'. I'm convinced this gives me 2 extra meters on every jump. Pfft.

NorthLines
4 posts
28 Mar 2018 8:30PM
Thumbs Up

I've played around quite a bit with the stock sizes Shinn uses. Smaller ones (43mm I think) are so much more fun (with Monk and Ronson, at least.) Locked in when you want it, and super fun skatey when you flatten the board out. I've completely ditched the big fins - even in lighter wind.



Subscribe
Reply

Forums > Kitesurfing Gear Reviews


"Fin size shinn monk??" started by johnojjohnso