Devon on the Huevo
Select to expand quoteTux said..
Devon on the Huevo
As an aside I just went at looked at a C bucket and Flat tracker and Heuvo...the Howard mini has a lot more roll in the bottom that all three and thinner rails than the Huevo...hard to judge but i'd say it also has more rocker especially in the tail than any of the others and yes teh nose is slightly wider but I would see that as an advantage unless your surfing slabs
Damn he surfs good... Being picky i'd say the board seems smoother and a little more natural when he's on the tak vs the shorter Huevo...
This ones pretty nice too...
Select to expand quoteonefin said..
A compelling argument for the Russ Short bonzer 3
One of the best pics Ive seen for a while and the article in TSJ is a pretty good read as well
Talk about burying the rail- Epic
I'm sliding down the Hull rabbit hole. 10 surfs since I got the Death Machine and only two on other boards...
I might ask someone to try save me but I'm sure I'd spurn any offers without a thought...
Oh yeah good day mid crew get your froth on, have a mid sort of glide kind of day, enjoy the flow you legends.
Select to expand quoteMacaha said..
Oh yeah good day mid crew get your froth on, have a mid sort of glide kind of day, enjoy the flow you legends.
Thanks mate, it's a hull of a day
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Select to expand quoteAndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Andy I've got the A4 8 and 9 inch I use the 9 in my glide board works unreal so much so no need to try anything else.
Try Wild Things at Byron they a great fin selection and speedy delivery also they are right next door to mctavish.
Select to expand quoteAndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
Select to expand quotelaceys lane said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
The screw location of the Alkali Greenough is in front of the fin vs the TA is behind the fin...
I'm sure it makes no difference for performance but just personal preference... And like I said, the Alkali is out of stock with no eta.
Select to expand quoteMacaha said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Andy I've got the A4 8 and 9 inch I use the 9 in my glide board works unreal so much so no need to try anything else.
Try Wild Things at Byron they a great fin selection and speedy delivery also they are right next door to mctavish.
Isn't that a dirty Hipster shop @Mac 
Select to expand quoteAndyrooMac said..laceys lane said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
The screw location of the Alkali Greenough is in front of the fin vs the TA is behind the fin...
I'm sure it makes no difference for performance but just personal preference... And like I said, the Alkali is out of stock with no eta.
Yes. I understand front or back. But why the back for you.
Is it voodoo
Yeah if mac calls you a hipster tell him to take a good look in the room of mirrors
Select to expand quoteAndyrooMac said..Macaha said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Andy I've got the A4 8 and 9 inch I use the 9 in my glide board works unreal so much so no need to try anything else.
Try Wild Things at Byron they a great fin selection and speedy delivery also they are right next door to mctavish.
Isn't that a dirty Hipster shop @Mac
Yeah but worth a visit
Select to expand quotelaceys lane said..AndyrooMac said..laceys lane said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
The screw location of the Alkali Greenough is in front of the fin vs the TA is behind the fin...
I'm sure it makes no difference for performance but just personal preference... And like I said, the Alkali is out of stock with no eta.
Yes. I understand front or back. But why the back for you.
Is it voodoo
Yeah if mac calls you a hipster tell him to take a good look in the room of mirrors
I read or watched a thing ages ago which showed that the screw in front of the foil breaks the water flow... Like I said, at my level of ability (lack of ) i'm sure it has no affect at all...
Select to expand quoteAndyrooMac said..laceys lane said..AndyrooMac said..laceys lane said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
The screw location of the Alkali Greenough is in front of the fin vs the TA is behind the fin...
I'm sure it makes no difference for performance but just personal preference... And like I said, the Alkali is out of stock with no eta.
Yes. I understand front or back. But why the back for you.
Is it voodoo
Yeah if mac calls you a hipster tell him to take a good look in the room of mirrors
I read or watched a thing ages ago which showed that the screw in front of the foil breaks the water flow... Like I said, at my level of ability (lack of ) i'm sure it has no affect at all...
You can get foiled screws these days
Select to expand quotelaceys lane said..AndyrooMac said..laceys lane said..AndyrooMac said..laceys lane said..AndyrooMac said..
Stumbled across this old thread looking for an 8.5" Greenough Fin for 8'2" Lizzy... Some interesting stuff in there...
Ended up ordering the True Ames as the Alkali has the screw mount at the front of the fin and I prefer it at the back... And Alkali have no stock...
www.seabreeze.com.au/forums/Surfing/Longboarding/Anyone-used-a-True-Ames-Greenough-Fin?page=1
Care to expend on screw positionings
The screw location of the Alkali Greenough is in front of the fin vs the TA is behind the fin...
I'm sure it makes no difference for performance but just personal preference... And like I said, the Alkali is out of stock with no eta.
Yes. I understand front or back. But why the back for you.
Is it voodoo
Yeah if mac calls you a hipster tell him to take a good look in the room of mirrors
I read or watched a thing ages ago which showed that the screw in front of the foil breaks the water flow... Like I said, at my level of ability (lack of ) i'm sure it has no affect at all...
You can get foiled screws these days
and screwed foils
Select to expand quoteMacaha said..
Mid length in other words means average size not short not long but mid length
Just a transition to longboards
Select to expand quotelaceys lane said..Macaha said..
Mid length in other words means average size not short not long but mid length
Just a transition to longboards
Yes so Middle age as in mid age not young but not old just average age.
Select to expand quotelaceys lane said..Macaha said..
Mid length in other words means average size not short not long but mid length
Just an evolution from longboards/shortboards
I fixed this for you Lacey
Midlengths: upping the ante in one's arsenal of weapons in the war amongst the waves. The goal: total domination. For too long (pun intended) longboarders have used their foam advantage to pillage and pilfer. SUP riders have upped the ante and displaced longboarders as the foam bombers. Midlengths are many shortboarders defensive moves in the chess game of wave capture. Anything goes when greed rules the lineup.
LOL...!
Select to expand quotechrispthekiwi said..
New stick
Damn!!! rotated the pic so its not on its side...
Looks unreal and love that tint, what dims?
Agreed, Looks awesome! I'm increasingly a fan of that kind of slightly pulled in but rounded off nose. I can't see any downsides, except perhaps streetcred in certain lineups but all the better for upsetting the status quo I say.
Select to expand quoteAndyrooMac said..chrispthekiwi said..
New stick
Damn!!! rotated the pic so its not on its side...
Looks unreal and love that tint, what dims?
Dims are 7'6" 21 3/4" 2 7/8" now all I really want to complete the quiver is a (Christenson?) fish - anyone know how to size em?
who am I kidding the quiver is never complete...
Wingnut getting deep on a "popout"
Click link for vid:
www.instagram.com/p/BwzFTmPD-um/?igshid=5rcnq7zuodhp
